In the following video you will find a step-by-step description of the set-up and installation of our HyCeram® devices.

Get Ready

• Before the first set-up, make sure that the workplace is clean and check the necessary connections for compressed air and electricity.
• You can find more set-up videos on our YouTube Channel.

The processing of LuxArt® follows a clearly defined concept and procedure. In this video we explain, step by step, how this design composite is processed, hardened and finished:

• After the preparation of the area, sandblast or laser it, and then clean it.
• Apply Link / Bond and secure the bond between LuxArt® and the metal.
• Cure the bond with TwinLux Dual or in CeraLux.
• Connect the LuxArt® cartridges to the dosing system and apply the design composite (ATTENTION: Please note the different layer thicknesses.)
• Cure the coated items with a suitable TwinLux Dual or CeraLux light unit.
• Then continue to work in the cured surface mechanically (smooth down, polish), (provided that it wasn’t cured under nitrogen).